CO2 Incubator

6024 Temperature, Relative Humidity, CO2, and Decontamination Cycle [details] [pdf]
  25 Cu. Ft., 5C Above Ambient to 60C, Ambient to 95% RH, 0 to 20% CO2, Automatic Moist Heat Decontamination Cycle  


6034 Temperature, RH, and CO2 [details] [pdf]
  30 cu.ft., 5C above ambient to 60C, ambient to 95% RH, 0 to 20% CO2  



NEW LARGE CAPACITY CO2 INCUBATORS
 
Caron's 2nd generation Reach-In IR-CO2 Incubator incorporates the latest technology in cell culture incubators in a large capacity platform.  Designed with customer convenience in mind, this unit features 25 cu. ft. of precise temperature, IR-CO2, and controlled humidity space.  Caron's new design is the industry's first large capacity incubator to offer an automatic moist heat decontamination cycle that cleans the unit overnight.  This incubator offers all the contamination control and cleanability benefits customers value in modern bench-top designs.
 
STANDARD FEATURES
  • Temperature range of 5°C above ambient to 60°C is controlled with a drift-resistant RTD temperature sensor that provides stable temperature control over long periods of time.  Minimal calibration is required.
  • Humidity is actively controlled from ambient to 95% RH.  There is no water pan or standing pool of water inside the incubator, minimizing the possibility of contamination and corrosion.  Water is injected on an as-needed basis to maintain a precisely controllled humidity level with no need for a humidity pan.
  • An IR (infrared) sensor is utilized to maintain a CO2 range of 0 to 20%.  This sensor measures only CO2, not temperature or humidity, and allows for fast recovery after door openings.  Your cultures will see virtually no fluctuation in pH levels.
  • The drift-resistant CO2 sensor provides excellent performance over extended periods of time.  There is no need to constantly monitor values with an independent instrument or recalibrate.
  • This incubator comes complete with factory-installed, heavy-duty casters and will roll through a standard 34" x 80" doorway without modification.
  • Caron's gentle horizontal airflow system generates evenly distributed airflow across all shelf locations.  Maximum uniformity and rapid recovery are maintained even under heavy cabinet loads.
  • The ergonomically-designed door handle allows easy access into the chamber and a handle provided on the sliding stainless steel shelves makes it easy to access your valuable samples.
  • The stainless steel interior is easily cleaned and highly resistant to corrosion.
  • Heated, triple-pane glass door minimizes condensation on the door for a clear view of your product, and aids in rapid temperature recovery.
  • The lockable control panel minimizes the possibility of unauthorized access and two access ports, one on each side of the chamber, make validation easy and provide user-convenience for connecting instrumentation.
  • Designed with energy efficient components, including high R, CFC-free foam insulation, the incubator is powered by commonly available laboratory electrical outlets.

DECONTAMINATION CYCLE

 

By simply pressing the "DECON" switch on the control panel, Caron's built-in moist heat decontamination cycle allows the user to automatically eliminate microbial contamination (including mycoplasma) overnight.  Use of the 90°C decontamiantion cycle extends the time between manual cleaning cycles.  Caron's new Model 6024 is the only large capacity IR-CO2 incubator on the market today with a moist heat decontamination cycle.
 
CUSTOMER CONFIGURABLE INTERIOR
 
Different incubator interior configurations are required for different cell culturing techniques and can change over time.  Until now, users of large capacity incubators often purchased new incubators due to the inability to reconfigure their existing incubator interior in the field.  By introducing the industry's first large capacity incubator with "tool-less" removal of interior components, users have virtually unlimited shelving configurations that are easily field installed.  By offering multiple shelving configurations Caron's incubator can be reconfigured in the field to accommodate shakers, cell rollers, and other unique shelving requirements.
 
SPECIFICATIONS
 
MODEL
 6024-1    
6024-2 
 6024-3
 6026-1
 6026-2
 6026-3
Temperature Range
 5°C Above Ambient to 60°C 
5°C to 60°C
Temperature Control
 ± 0.1C 
 ± 0.1C  
Temperature Uniformity
± 0.3C 
± 0.3C 
Temperature Sensor
RTD
  RTD
Humidity Range
  Ambient to 95% RH
     Ambient to 95% RH    
Humidity Control 
 ± 3% RH 
 ± 3% RH 
Humidity Sensor 
   Capacitive   
  Capacitive  
CO2 Range 
   0-20% CO2  
  0-20% CO2  
CO2 Control 
 ± 0.1% CO2
 ± 0.1% CO2 
CO2 Sensor 
  Infrared  
  Infrared  
Interior Dimensions 
  32"W x 27"D x 52.7"H
    (81.3cm x 68.6cm x 133.9cm)  
  32"W x 27"D x 52.7"H
    (81.3cm x 68.6cm x 133.9cm)  
Interior Construction 
  Stainless Steel  
  Stainless Steel
Exterior Dimensions 
  35.5"W x 33.3"D x 77.1"H
    (90.2cm x 84.6cm x 195.8cm)  
  35.5"W x 33.3"D x 77.1"H
    (90.2cm x 84.6cm x 195.8cm)  
Exterior Construction 
  Cold Rolled Steel, Powder Coated  
  Cold Rolled Steel, Powder Coated 
Work Space 
  25 Cu. Ft. (708 liters)  
  25 Cu. Ft. (708 liters)
# of Shelves 
  Four (4)  
  Four (4)
Shelf Construction 
  Stainless Steel  
  Stainless Steel  
Shelf Dimensions 
  29.2"W x 26.4"D
     (74.2cm x 67.1cm)  
  29.2"W x 26.4"D
  (74.2cm x 67.1cm)
Electrical
115V,60 Hz, 16A  
230V, 60 Hz, 8A  
230V, 50 Hz, 8A 
115V, 60 Hz,
16A
230V, 60 Hz,
8A
230V, 50 Hz,
8A 
Shipping Weight 
525 lbs.
  525 lbs.  
  825 lbs.  
 575 lbs.
  575 lbs.  
  875 lbs.  
 
STANDARD ACCESSORIES
 
Caron's new 25 cu. ft. Reach-In CO2 Incubator is easily customized by selecting from a variety of accessories.  Our optional environmentally-friendly Condensate Recirculating System takes your tap water, then continuously conditions and  recycles it, eliminating the need for plumbing in a water source or a floor drain.  Our optional in-line UV water purifier further minimizes the probability of contamination.  See the Optional Accessories section for complete details.  

Available Accessories for Model 6024
Catalog No. Name Unit of Issue Models
ALRM301 Remote Alarm Contacts Each 6024
  Remote Alarm Contacts for 6020 Series Chambers. Provides NO and NC dry contacts for alarms.
BOTL301 Side Mounted Carboy Each 6024
  Side Mounted Carboy for Humidified 6020 Series Chambers. Carboy water fill bottle with cap, 2.5 gallons (9.5 liters). Includes tubing and fittings.
CELR301 Cell Roller Kit Each 6024
  Cell Roller Adapter Kit for 6020 Series Chambers. Includes reinforced floor and ramp.
CRSY102 Condensate Recirculator Each 6010, 6024, 6030, 6034, 6035, 6105, 6545
  Condensate recirculating system most commonly used with the chamber when necessary in-house water supply or floor drain is unavailable, or as an attempt to conserve water usage. Collects, filters, and reuses water as the unit calls for humidity.
DLUX303 Deluxe Controller Each 6024
  Deluxe Controller for Model 6024. Includes Ramp & Soak, analog output and RS-485 communications.
DOOR301 Light Tight Door Cover Each 6024
  Light Tight Door Cover for 6020 Series Chambers.
DOOR302 Solid Door (no glass) Each 6024
  Solid Insulated Door (no glass) for 6020 Series Chambers.
DOOR303 Lexan Inner Door Kit Each 6024
  Lexan Inner Door Kit for 6020 Series Chambers. Divides the chamber into four equally sized compartments. Minimizes chamber interruption during a door opening.
FLTR301 Condenser Air Filter Each 6024
  Condenser Air Filter. Replacement kit for refrigerated 6020 Series Chambers.
FLTR302 CO2 HEPA Filter Each 6024
  CO2 HEPA Filter Replacement Kit for Model 6024 and 6026.
GASG301 Built-in CO2 Gas Guard Each 6024
  Built-in CO2 Gas Guard for Model 6024. Allows two CO2 tanks to be connected to a unit. Automatically switches from the primary tank to the secondary tank when low gas pressure is detected.
LGHT602 In-line UV Purifier Light Each 6024
  UV Germicidal Lamp for Humidified 6020 Series Chambers. Deactivates microorganisms in-line with humidity water supply.
LOCK301 Door Lock Each 6024
  Outer Door Lock for 6020 Series Chambers.
OUTL301 One Internal Duplex Outlet Each 6024
  Single Interior GFI Duplex Outlet for 6020 Series Chambers. Fused at 2A. Humidity levels cannot exceed 90% RH with installation of this accessory.
OUTL302 Two Internal Duplex Outlets Each 6024
  Dual Interior GFI Duplex Outlets for 6020 Series Chambers. Fused at 2A. Humidity levels cannot exceed 90% RH with installation of this accessory.
PORT301 Additional 2 Each 6024
  Additional 2" Access Port for 6020 Series Chambers. Location to be specified at time of order.
PORT302 Fresh Air Ports Each 6024
  Fresh Air Ports for 6020 Series Chambers.
PUMP301 Drain Water Pump Each 6024
  Drain Water Pump for Humidified 6020 Series Chambers.
RCDR301 Built-in Temperature Recorder Each 6024
  Built-in Temperature Recorder. Single Pen, 6", 7 Day, 24 Hour.
RCDR302 Built-in Temp/RH Recorder Each 6024
  Built-in Temperature/Humidity Recorder. Dual Pen, 6", 7 Day, 24 Hour.
RCDR303 Built-in Temperature Recorder Each 6024
  Bult-in Temperature Recorder. Thermal printer, 10", 7 Day, 24 Hour.
RCDR304 Built-in Temp/RH Recorder Each 6024
  Built-in Temperature/Humidity Recorder. Thermal printer, 10", 7 Day, 24 Hour.
RCDR305 Side Mounted Temp Recorder Each 6024
  Side Mounted Temperature Recorder. Single Pen, 10", 7 Day, 24 Hour.
RCDR306 Side Mounted Temp/RH Recorder Each 6024
  Side Mounted Temperature/Humidity Recorder. Dual Pen, 10", 7 Day, 24 Hour.
SHKR301 Two-tier Shaker Support System Each 6024
  Stainless Steel Shaker Support System for 6020 Series Chambers. Capable of supporting two 150# shakers rotating at up to 150 RPM each. 25" clearance between each of two shelves. Includes two 115V GFI duplex outlets fused at 2A total.
SHLF300 Shelf Each 6024
  Additional Stainless Steel Reinforced Perforated Shelf.
SHLF301 Shelf Each 6024
  Additional Stainless Steel Wire Shelf
SHLF302 Shelf Each 6024
  Additional Stainless Steel Solid Shelf
SHLF303 Shelf Each 6024
  Additional Heavy Duty Stainless Steel Perforated Shelf
SHLF311 Shelf Each 6024
  Stainless Steel Wire Shelf Kit to replace standing shelving.
SHLF312 Shelf Each 6024
  Stainless Steel Solid Shelf Kit to replace standard shelving.
SHLF313 Shelf Each 6024
  Heavy Duty Stainless Steel Perforated Shelf Kit to replace standard shelving.

 
©2007, CARON Products & Services, Inc.  Site Map | Web Development : OffWhite